|
Cleaning Care: Blade
sets should be oiled once a day minimum! Ideally, it should be done before every
grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the
external surfaces to reduce the possibility of getting it on the animal's coat.
If the clipper blades leave streaks or slow down, it's a sure sign that the
blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the
cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray
lubricants contain insufficient oil for good lubrication, but are an excellent
clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan
of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry
blades with a clean, dry cloth. If blades will still not cut, there may still be
some hair trapped between the upper and lower blade. Remove the blade off the
clipper and slide the upper blade to one side without loosening the tension
spring or moving the upper blade completely out from under the tension spring.
Wipe the surfaces of the blades clean with a dry cloth, then place a drop of
clipper oil where the upper and lower blades meet and also in the guide slot of
the tension spring.
Always replace broken or nicked blades to prevent injury.
|
 "Revolutionary Titanium Ceramic Blades")